This laser is applied in multiple fields: metal fittings, hardware furniture, bathroom, medical equipment, sports equipment, automotive production, building decoration, electrical equipment, elevator equipment, and other major fields of metal pipe processing. Specifically for stainless steel pipe fittings, processing of pipes for industries such as automobiles, motorcycles, electric vehicles, bicycles, air conditioners, railings, guardrails, anti-theft nets, and shelves. The company continuously innovates and has advanced technology and continuous research and development capabilities in the industry. It is customer-oriented and customized according to customer needs, providing customers with the most cost-effective laser equipment products.

Working Video:https://www.youtube.com/watch?v=GgU9t5HCefU

Pipe processing range Round tube: ∅16-85mm Square tube: 16×16-60×60mm
Minimum cutting length 1mm
Cutting material thickness ≤3.5mm
Incision width 0.1-0.15mm
Cutting accuracy ±0.2mm
maximum acceleration 1.6G
electricity demand 380V/50Hz
Tlaer equipment weight 1000kg
Machine dimensions 2800x1200x2100
Weight of loading rack 800Kg
Size of loading rack 6000x2000x1700

5-1Basic usage requirements
1. Fiber laser environmental requirements: temperature between 15-35℃, relative humidity below 85%.
2. On-site power distribution cabinet: 380V50Hz, with short circuit protection, etc.
3. The equipment should be installed with a dedicated ground, and its ground resistance should not exceed 4Ω.
4. Provide necessary lifting equipment and personnel.
5. Provide materials required for on-site debugging of equipment, such as steel plates, etc.
6． Auxiliary conditions required for the normal operation of laser cutting equipment:
①Equipment rated input voltage: 380V/50Hz
Voltage stability: ± 5% (voltage regulator recommended)
②Compressed air supply device (it is recommended to configure an air storage tank and cold dryer)
Rated pressure: high pressure is not less than 1.6Mpa, low pressure is not less than 0.6Mpa
Air flow: greater than 1.0m³/min, volume: 1 m³
③Auxiliary gas
Cutting auxiliary gas purity requirements
Nitrogen (N2) ≥99.99%
Compressed air ≥1.6 Mpa
(Air cutting can be used for pipes below 3 mm (carbon steel, stainless steel), which is cheaper to use)

laser cutting machine

laser pipe cutting machine 3D CLD90-1500 for cutting stainless steel copper aluminum tube