Case Study: DW50CNC3A1S Automatic Tube Bender for Hydraulic Tubing — Russia Construction Machinery Manufacturer

Industrial tube bending machine forming a black hydraulic hose with metal fittings

Factory: JIANGSU CLAYTON MACHINERY CO., LTD

This case is suitable for Yandex website, catalog, and social media promotion. Image placeholders are marked for you to insert the machine photo and finished hydraulic tube photo.

Client Profile

A Russian local manufacturer of excavators, loaders and agricultural machinery parts, located in Moscow region. The workshop produces high-pressure hydraulic hard tubes for construction machinery hydraulic circuits. These hydraulic tubes are core components for hydraulic lifting, travel and steering systems of excavators and wheel loaders.

Application Scenario

The client fabricates 3D multi-bend carbon steel hydraulic hard tubes for construction machinery hydraulic assemblies. The finished tubes are assembled into hydraulic valve groups, pump connection pipelines and boom hydraulic circuits of excavators. The working environment of these hydraulic tubes is high pressure, vibration and large temperature fluctuation in Russia. The pipe must keep uniform wall thickness, no wrinkle, no flat deformation, and stable hydraulic sealing performance.

Client Requirements

  1. Tube specification: Carbon steel hydraulic tube OD 12–50 mm, wall thickness 1.5–3.0 mm; multi-bend 3D spatial hydraulic pipelines.
  2. Quality requirement: Bending angle tolerance ≤ ±0.1°, tube ovality ≤ 5%, wall thinning controlled below 12%, no wrinkles on inner bend.
  3. Production pain points before: Old NC bender needed manual adjustment for every bend; unstable repeat accuracy; high rejection rate; long setup time when switching new hydraulic tube drawings; could not directly import 3D tube drawings.
  4. Production target: Batch production of different hydraulic tube models, fast program switching, suitable for small-batch and multi-variety orders for construction machinery spare parts.
  5. Local requirement: Russian-language operation interface, after-sales technical guidance, spare parts supply for long-term stable operation.

Solution Provided by Clayton Machinery

JIANGSU CLAYTON MACHINERY supplied DW50CNC3A1S 3-axis automatic CNC tube bender (3A1S: bending Y-axis hydraulic, feeding B servo, rotation C servo, single stack tooling).

Core configuration for this project:

  • Mandrel bending system + wiper die set, to avoid tube wrinkling and flattening for high-pressure hydraulic tubes
  • Russian language CNC touch screen, YBC / XYZ coordinate input, 3D tube drawing import, springback compensation function
  • Mitsubishi servo feeding and rotation, hydraulic bending power, stable for thick carbon steel hydraulic pipe
  • Max bending capacity: Φ50×2.0 mm, max bending angle 190°, feeding length up to 3000 mm
  • Program storage: 1000+ groups of hydraulic tube programs, one-click recall for repeated orders
  • On-site installation training, operation video, remote technical support, spare parts package for Russian workshop

Finished Hydraulic Tube Product

3D multi-bend hydraulic hard tubes for excavator boom hydraulic circuit, smooth bending surface, consistent size, ready for flaring and welding after bending.

Effect & Customer Feedback

  1. Bending accuracy stable at ±0.1°, rejection rate dropped from 11% to below 2.5%.
  2. Program switching time reduced greatly; new hydraulic tube samples can be finished within 20 minutes after drawing import.
  3. Mandrel bending guarantees inner smoothness, meets high-pressure hydraulic test requirement for construction machinery.
  4. The machine runs continuously in the workshop, fits the multi-variety spare-part production mode of Russian construction machinery factories.

← Back

Thank you for your response. ✨

Leave a Reply